A tactical vest that is organized optimally can be helpful to identify the user and make the appearance of their equipment look professional. Plate carrier patches identify the wearer, show team or department affiliation, and customize a carrier without altering it.
If you are a police officer or military personnel, a member of an airsoft team, or a fan of tactical equipment, your setup should start with the purpose of each patch and the available space on your carrier. Name tapes, callsign patches, blood type marks, and flag patches are among the most widely used types of tactical equipment.
Since each of them serves its own purpose, it is important to pay attention to the size, the type of backing, the materials used, and the location of patches. Eagle Patches USA produces custom patches for the military, law enforcement agencies, and tactical equipment users.
This guide covers which patches to wear, how to size and place them, and what to check before you order custom sets.
What Plate Carrier Patches Should You Put On?
The ideal configuration will be based on the use of the vest, whether it is government-issued equipment or self-owned equipment and the identification requirements. It is advisable to start with basic identification first and afterwards incorporate ornamental designs.
Common plate carrier patches include:
- Name tapes: Display a last name or approved identifier.
- Callsign patches: Show a radio callsign, nickname, or team identifier.
- Blood type patches: Display a stated blood type for identification purposes.
- Flag patches: Represent a country, state, or organization where permitted.
- Department and unit patches: Identify a police department, team, unit, or organization.
- Morale patches: Add a personal design, slogan, or team-themed graphic.
It is not necessary to have every kind of patch on one vest. A law enforcement officer may only focus on department-authorized identification and name tapes, while airsoft participants may wear team patches, callsigns, flags, and morale patches. Military personnel must adhere to their unit regulations regarding uniforms and equipment.
Tactical Vest Name Patches: Make Identification Clear
Tactical vest name patches are among the top useful attachments on a plate carrier. They display information like the name or authorization in an easily readable design. In case the team’s gear is stacked together, name tapes help to separate them from one another.
A common name tape has a rectangular shape with all letters in one line. The priority must be given to readability rather than decorating the design.
Choosing the Right Name Tape
Before ordering custom name tapes, confirm the following details:
- Text: Check the spelling, capitalization, and any required abbreviations.
- Dimensions: Measure the loop panel on your vest instead of assuming a standard size will fit.
- Lettering: Choose a font that remains readable at the intended viewing distance.
- Color: Match the background and lettering to your equipment or approved uniform requirements.
- Backing: Select a hook backing compatible with the vest’s loop panel.
To achieve an appealing layout, ensure the text is appropriately centered and refrain from congesting excessive letters into a small area. You may require a wider design or a more compact style for long names or department titles.
Custom name patches can also be ordered for different carriers, bags, or tactical jackets. For users who swap between setups, it is crucial to ensure the dimensions and backing match all the items.
Callsign Patches for Teams and Individual Gear
The callsign patch is a simple identifier used for one person or group. Callsign patches are especially favored by airsoft units, training groups, civilian tactical equipment owners, and those using callsign-based systems.
A callsign is defined as a short word, a nickname, a number, or a combination of letters and numbers. The best designs are easy to read and do not detract from other important forms of identification.
How to Design a Callsign Patch
Try to keep your design simple enough for maximum readability. Consider the callsign first, then think of if you want a small team image, color, or border included with your callsign.
Taking an example, an airsoft group may use matching rectangular patches that have their callsign on them and the same team color. A personal gear set may use a nickname in a different color font on a dark background.
Make sure to check character count, patch dimensions, and available panel space before ordering. If various members of the squad use the same logo, ensure the same font and color scheme are used on all patches.
Custom tactical patches can serve a purpose when people need the same design but different names on each patch. Check the proof showing the final letters and design before approving for the production.
Build Your Own Custom Plate Carrier Patches
From embroidered unit logos to PVC morale patches, turn your design into a custom patch with the size, colours and backing you need.
Blood Type Patches: Important Details Before Ordering
Blood type patches represent blood types in a compact manner: A+, O-, or AB+. Some tactical gear users adopt these patches. Organizations may regulate whether such patches may be worn and where.
A blood type patch is not sufficient proof of a person’s blood type and should not be accepted instead of medical diagnostic tests. During emergencies, medical care is provided following the identification and transfusion protocols, instead of relying solely on the clothing or equipment label.
Designing a Blood Type Identifier
If your organization permits a blood type patch, confirm the correct information and required format before submitting the order.
Consider these details:
- Correct lettering: Verify the blood type and Rh factor.
- Contrast: Choose colors that make the characters easy to distinguish.
- Size: Ensure the text fits without becoming cramped.
- Placement: Follow your organization’s requirements or the intended use of the carrier.
- Durability: Choose a construction suitable for the conditions in which the gear will be used.
When it comes to the layout of tactical gear for civilians, there is always a degree of flexibility. However, when it comes to military-style gear or devices for military, police, or emergency responders, there are specific rules and regulations in place that need to be adhered to.
Flag Patches for Plate Carriers and Tactical Vests
Flag patches are often used to convey the identity of the country, state, or team. Flag badges complement the uniform well, especially if the flag patch is matched with the name tape and the identification patch of the unit or department.
You should pay attention to the orientation, size, and colors of the flag patch and the type of patch panel that you have before you buy the flag badge. What looks good on a backpack may not be suitable for the narrower shoulder panel of a tactical vest.
Standard and Custom Flag Designs
A standard flag design is appropriate when you need to display a recognizable symbol that lacks wording. Variations might have a border, neutral colors, or an approved team identifier.
When creating custom Velcro patches for tactical equipment, it is important to clarify if the flag ought to feature standard colors or a subdued color range. It cannot be assumed that every institution follows the same principles of color use.
In case of official use, check the necessary dress codes and rules related to the department or unit before placing the ordered patch. In the case of airsoft and personal gear, you will usually have more options for your design, subject to the event and venue.
How to Arrange Patches on a Tactical Vest
Placement starts with the vest measurement, and different vest designs have different measurements for the panels, shoulder fields, and interchangeable front flaps. A single layout cannot work for every model.
Use the guideline below only as a starting point for equipment of personal use, not as an alternative to official placement recommendations.
| Vest area | Common patch choices | Main consideration |
| Upper chest | Name tape or approved identification | Keep text clear and readable |
| Front loop panel | Unit, team, or approved identification patch | Check available width and height |
| Shoulder panel | Flag or authorized identifier | Match the panel shape and orientation |
| Secondary loop panel | Callsign or morale patch | Avoid unnecessary clutter |
| Rear identification panel | Approved department, team, or role identifier | Ensure it fits the carrier and intended use |
Keep Essential Identification Easy to Read
Begin by applying the necessary identification patches according to your specific needs. Apply secondary patches once you have confirmed that the essential identification is easily visible and not covered by them.
Avoid placing patches on areas where straps, clips, release handles, or any functional part of the system would be covering the patches. In case you use these patches for military or law enforcement purposes, please follow your department’s guidance. Some equipment can only be used with specific patches.
Having standardized layouts in airsoft and leisure setups ensures easy identification among team members. Additionally, patches with the same designs, shapes, and colors across multiple carriers bring a sense of unity among the team.
How to Order Police Velcro Patches for Tactical Vests
Ordering police Velcro patches for tactical vests enthusiasts involves several key steps.
Start with verifying the wordings and authorization, checking whether the names of the department, officer ID, etc., are authorized. After that, obtain the measurement of the functional loop area of the vest to ensure that the patch does not overlap with other panels or fastenings.
After that, you should select the style of the patch. Embroidery is the classic technique, and woven patches are more suitable for complicated designs, while PVC patches are usually designed for use outdoors and are colorful.
The design has to be chosen according to the department’s needs and specifications. After which you have to choose the backing type for the patch Velcro (hook-and-loop). No loop panel on your carrier? Many plate carriers use MOLLE/PALS webbing (rows of woven nylon loops) instead. Attach patches with a hook-and-loop-backed mount that laces into the webbing, or sew-on or MOLLE-clip backing designed for it.
The last step is to check the digital proof before approving the production. Make sure you check spelling, text position, colors, and sizes. Every name and every identification should be checked properly, especially with team orders. This results in custom police patches that meet the expectations and bring a uniform appearance among the team.
Which Material Is Best for Plate Carrier Patches?
The type of patch material has a significant impact on how your patch will look, its detail level, and how well it can serve its purpose. Eagle Patches USA offers a variety of patches; these include woven, embroidered, and PVC patches, among others.
| Patch type | Best suited to | What to consider |
| Embroidered | Names, logos, and bold identification | Thread texture and lettering size |
| Woven | Fine lettering and complex designs | Small text still needs sufficient space |
| PVC | Raised designs and outdoor gear | Thickness, flexibility, and panel fit |
| Sublimated | Multicolor graphics and gradients | Surface finish and intended conditions |
Bear in mind that no matter what material is used, make sure to check the patch size, backing, and border style as well. This helps with the patch looking good both in the mockup and in real life attached to your garment or gear.
Need Custom Name Tapes or Callsign Patches?
Personalize your gear with clear name tapes, callsigns, flags or identification patches. Choose your artwork, dimensions and attachment style.
What to Check Before Ordering Custom Tactical Patches
A few checks before production can prevent common ordering problems.
- Measure the panel first. Record the usable dimensions and compare them with the finished patch size. Include any border in the measurements.
- Check every character. Names, callsigns, numbers, and blood type identifiers deserve particular attention. A single incorrect character can make an identification patch unusable.
- Keep the design readable. Avoid excessive text, overly intricate details, or color combinations with poor contrast.
- Confirm the backing (sew-on, iron-on, Velcro, or Molle). Make sure the patch is designed for the attachment system on your vest.
- Review the quantity. Individual buyers may need only a few patches, while police teams, airsoft groups, and organizations may require matching sets with individual names.
- Approve the proof. Check the final layout before production, especially when ordering multiple designs in one batch.
When searching for the best custom patch company tactical gear buyers can rely on, evaluate the material quality, designs, proofs, order flexibility, and vendor’s ability to maintain uniformity across a batch of patches.
Eagle Patches USA takes great pride in being a trusted patch maker in the USA with thousands of satisfied clients and years of excellence. Our expert team communicates throughout the process, keeping you in the loop while your patches are manufactured.
Frequently Asked Questions
Which patches to wear on a plate carrier?
The name tape, callsign, flag, unit designation, and blood type patches are among the most popular choices. Select depending on your needs, available panel area, and organizational policy.
Where to attach name tape on a tactical vest?
A popular spot is the upper chest area; however, the specific side and placement vary from carrier model to carrier model and may be specified in regulations. Before you order, always measure the panel first and check relevant guidance.
How long does it take to deliver the order?
Our standard turnaround is 10 to 14 days, with fast shipping also available for close deadlines.
Which patches, among PVC or embroidered, are more suitable for tactical vests?
There is no one best. Embroidery is preferable for more traditional identification patches with big and bold letters. The PVC option is flexible and raised. PVC is also resistant to water and dust.
Outfitting a Team? Order Custom Patches in Bulk
Get consistent patch designs for your team, club or organization. Request pricing for bulk embroidered, PVC and hook-and-loop patches.
Build Your Vest Patch Set with Eagle Patches USA
A proper configuration of plate carrier patches consists of clear identification, well-matched backing, and patches that match the available space. Regardless of whether you need tactical vests with name tapes, callsign identifiers, flags, or police logos, thinking out the layout in advance helps in achieving a practical and uniform result.
Eagle Patches USA provides custom patch designs to individuals, teams, and organizations. Our services include free design assistance and digital proofs that will allow you to review your design before production begins. Contact us today for a free quote.
